Rancang Bangun Tranformator Pit Untuk Runway Edge Light
Abstract
The AFL has an important role in flight safety at airports. Runway edge light is the main component of AFL that guides aircraft during takeoff or landing. However, several airports in Indonesia have experienced runway edge light failures due to damage to the series circuit. This damage is caused by interference from water, dust, and rodents that are not fully protected by pit transformers. This research aims to design and implement a new pit transformer as a solution. Using a three-level and six-stage R&D method, the pit transformer is made of 304 stainless steel with a thickness of 2 mm in a cylindrical shape and equipped with HDPE pipes to secure the series circuit from damage. Waterproof and functional tests were conducted in the laboratory. The results show that the pit transformer is able to protect series circuit components, optimize installation layout, and improve maintenance and repair efficiency. This research has the potential to strengthen the reliability of AFL series circuit systems and flight operations.
Downloads
References
Chlebek, J. (2019). Runway lighting systems as a key tool to extend operational capabilities of VFR airports. Transportation Research Procedia, 43, 236–242. https://doi.org/10.1016/j.trpro.2019.12.038
Civil Aviation Regulatory Commission. (2018). Airport Electrical System.
CMP. (n.d.). Cable Glands And Accessories. http://brassfactory.co.uk/cable-gland-accessories/%5Ct
SKEP/114/VI, Pub. L. No. SKEP/114/VI/2002 (2002).
ANNEX 14 - Aerodromes, Pub. L. No. ANNEX 14 (2016).
Law, M. S. A., & Ariffin, A. H. (2020). A Review on the Aerodrome Standard in the Aviation Industry. 2(2), 1–4.
Li, S., & Qi, K. (2014). The Mechanical and Fracture Property of HDPE-Experiment Result Combined with Simulation [Blekinge Institute of Technology Karlskrona, Sweden]. https://www.diva-portal.org/smash/get/diva2:830762/FULLTEXT01.pdf
M, M., & Septiawan, R. (2018). Analisa Pengujian Lelah Material Stainless Steel 304 Dengan Menggunakan Rotary Bending Fatigue Machine. Jurnal Rekayasa Material, Manufaktur Dan Energi, 1(1), 64–73. https://creativecommons.org/licenses/by-sa/4.0/
Ma, X., Yang, J., Peng, J., & Li, L. (2017). Design of the optical structure of airfield in-pavement LED runway edge lights. Second International Conference on Photonics and Optical Engineering, 10256, 1025602. https://doi.org/10.1117/12.2268687
Novita, S., Ginting, E., & Astuti, W. (2018). Analisis Laju Korosi dan Kekerasan pada Stainless Steel 304 dan Baja Nikel Laterit dengan Variasi Kadar Ni (0, 3, dan 10%) dalam Medium Korosif. JURNAL Teori Dan Aplikasi Fisika, 06(01), 21–32.
PR 26, Pub. L. No. PR 26 2022, Kementerian Perhubungan (2022).
PR 8, Pub. L. No. PR 8 TAHUN 2022 (2022).
Rohmannudin, T. N., Sulistijono, Kurniawan, B. A., Noerochiem, L., & Kusuma, W. D. (2023). Pelayanan Pengujian Pipa HDPE Untuk Aplikasi Saluran Air Bawah Tanah. Jurnal Kemitraan Dan Pemberdayaan Masyarakat, III(1), 74–79.
Salim, A., Sultan, A. R., & Akmal, A. (2016). Analisis Perbandingan Sistem Saluran Kabel Udara Tegangan Menengah (SKUTM) Dan Saluran Kabel Tanah Tegangan Menengah (SKTM). Elektrika No. II/Tahun 13/Nopember 2016, 195–212.
Salsabila, N. I. (2020). OPTIMALISASI FASILITAS AIRFIELD LIGHTING SYSTEM SEBAGAI PENUNJANG PELAYANAN NAVIGASI DAN KESELAMATAN PENERBANGAN DI BANDAR UDARA TAMBOLAKA Inspection ) Peralatan Fasilitas Elektronika. 1–9.
Santoso, K. A. (2019). Analisa Pengaruh Laju Korosi Plat Baja ST 40 dan Stainless Steel 304 terhadap Larutan Asam Sulfat. Majamecha, 1(1), 24–35. https://doi.org/10.36815/majamecha.v1i1.365
Standar Nasional Indonesia. (2011). Persyaratan Umum Instalasi Listrik 2011 (PUIL 2011). DirJen Ketenagalistrikan, 2011(PUIL), 1–133.
Thayoob, Y. H. M., Visvanathan, Y. S., Ahmed, S. K., & Ghani, A. B. A. (2016). Analysis and Characterization of Water Tree Condition in XLPE Cables from Dielectric Spectroscopy Measurement in Frequency Domain. IEEE 2015 International Conference on Signal and Image Processing Applications, ICSIPA 2015 - Proceedings, 526–531. https://doi.org/10.1109/ICSIPA.2015.7412247
Vidal, D., Monjo, L., & Sainz, L. (2016). Aeronautical ground lighting system study: Field measurements and simulations. IET Generation, Transmission and Distribution, 10(13), 3228–3233. https://doi.org/10.1049/iet-gtd.2015.1536
Wijaya, C. E. (2019). Airfield Lighting System pada Bandar Udara Sam Ratulangi Manado. Student Paper (EE). https://library.universitaspertamina.ac.id/xmlui/handle/123456789/163
Yu, Q., Li, X., Zhang, P., Yang, P., & Chen, Y. (2019). Properties of Water Tree Growing in XLPE and composites. ICEMPE 2019 - 2nd International Conference on Electrical Materials and Power Equipment, Proceedings, 409–412. https://doi.org/10.1109/ICEMPE.2019.8727376
Copyright (c) 2024 Ahmad Al Baihaqi Husaini Alba, Hendro Widiarto , Rubby Soebiantoro
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
.png)
1.png)
.png)
